HCTREN=DISABLED, OCIEN=DISABLED, BEN=DISABLED, DBGMD=HALT, KEYSIZE=KEY128, ERRIEN=DISABLED, RESET=INACTIVE, HCBCEN=DISABLED, SWMDEN=DISABLED, XOREN=XOR_DISABLED, EDMD=DECRYPT, KEYCPEN=DISABLED
Module Control
| XFRSTA | AES Transfer Start. 1 (START): Start the AES operation. |
| KEYCPEN | Key Capture Enable. 0 (DISABLED): Disable key capture. 1 (ENABLED): Enable key capture. |
| EDMD | Encryption/Decryption Mode. 0 (DECRYPT): AES module performs a decryption operation 1 (ENCRYPT): AES module performs an encryption operation. |
| SWMDEN | Software Mode Enable. 0 (DISABLED): Disable software mode. 1 (ENABLED): Enable software mode. |
| BEN | Bypass AES Operation Enable. 0 (DISABLED): Do not bypass AES operations. 1 (ENABLED): Bypass AES operations. |
| XOREN | XOR Enable. 0 (XOR_DISABLED): Disable the XOR paths. 1 (XOR_INPUT): Enable the XOR input path, disable the XOR output path. 2 (XOR_OUTPUT): Disable the XOR input path, enable the XOR output path. |
| HCTREN | Hardware Counter Mode Enable. 0 (DISABLED): Disable hardware counter mode. 1 (ENABLED): Enable hardware counter mode. |
| HCBCEN | Hardware Cipher-Block Chaining Mode Enable. 0 (DISABLED): Disable hardware cipher-block chaining (CBC) mode. 1 (ENABLED): Enable hardware cipher-block chaining (CBC) mode. |
| KEYSIZE | Keystore Size Select. 0 (KEY128): Key is composed of 128 bits. 1 (KEY192): Key is composed of 192 bits. 2 (KEY256): Key is composed of 256 bits. |
| ERRIEN | Error Interrupt Enable. 0 (DISABLED): Disable the error interrupt. 1 (ENABLED): Enable the error interrupt. An interrupt is generated when the Input/Output Data FIFO Overun (DORI), Input/Output Data FIFO Underun (DURI), or XOR Data FIFO Overrun (XORI) flags are set. |
| OCIEN | Operation Complete Interrupt Enable. 0 (DISABLED): Disable the operation complete interrupt. 1 (ENABLED): Enable the operation complete interrupt. An interrupt is generated when the Operation Complete Interrupt (OCI) flag is set. |
| DBGMD | AES Debug Mode. 0 (HALT): A debug breakpoint will cause the AES module to halt. 1 (RUN): The AES module will continue to operate while the core is halted in debug mode. |
| RESET | Module Soft Reset. 0 (INACTIVE): AES module is not in soft reset. 1 (ACTIVE): AES module is in soft reset and none of the module bits can be accessed. |